Technical RiderPA System

• Professional sound system with total power appropriate for the venue size (minimum 10 kW).
• Preferred brands: L-Acoustics, d&b audiotechnik, Funktion-One, Void Acoustics, or equivalent high-quality systems.

DJ Booth / Table

• Stable table large enough to accommodate all listed equipment, including the artist’s own gear.
• Minimum clear space for artist’s personal setup: 50 × 50 cm. (20″ × 20″)

Required Equipment

• Pioneer DJM-A9 (1 unit)
• Pioneer CDJ-3000 (2 units)
• Wireless microphone Shure Beta 58 (1 unit)
• In-ear monitoring system with transmitter & receiver (Sennheiser or Shure)

Connections & Cables (all Shielded)

• 1 × XLR–XLR cable from the wireless mic base (MIC mode!) to artist’s processor
• 2 × Jack–XLR (female) cables from artist’s processor to artist’s looper
• 1 × Stereo jack → 2 × mono jack (or XLR [depends on model]) cable for connecting in-ear transmitter to DJM headphone output (artist mixes vocals and music independently)
• 1 × Dual jack → dual RCA cable for connecting looper into DJM line input

Power Supply

• 3 free power outlets near the setup less than 1,5 m. (left or right side).
• Free space for artist’s equipment: 70 × 40 cm or 50 × 50 cm. (28″ × 16″/20″ × 20″)
• New batteries for wireless microphone and in-ear system.

Monitoring

• Stage monitors connected to DJM and positioned to minimize microphone feedback.

General Requirements

• All equipment, including cables, must be fully tested and in good working condition prior to soundcheck and performance.

If you have any questions please call What’sApp or Telegram +79037009149 (@Catmoonk)